I want to use a push and pull automatically in GitExtension, without entering my user and password in a prompt, every time.So how can I save my credentials in git? By setting a password, you could prevent unauthorized access to your servers and accounts if someone ever gets a hold of. Enter SSH config, which is a.

1. Ssh With Password
2. Ssh With Username Password
3. Ssh Config Save Password Tool

26.2.4 Packet Tracer – Configure Secure Passwords and SSH Answers

• The ssh-agent program is an authentication agent that handles passwords for SSH private keys. Use ssh-add to add the keys to the list maintained by ssh-agent. After you add a private key password to ssh-agent, you do not need to enter it each time you connect to a remote host with your public key. Generating authentication key pairs.
• Remote ssh save password Issue #74890 microsoft/vscode. Paste the config above: Select Remote-SSH: Connect to Host and select the google colab.

Packet Tracer – Configure Secure Passwords and SSH(Answers Version)

Answers Note: Red font color or gray highlights indicate text that appears in the instructor copy only.

The network administrator has asked you to prepare RTA and SW1for deployment. Before they can be connected to the network, security measures must be enabled.

Step 1:Configure Basic Security on the Router

Open a command prompt

1. Configure IP addressing on PCA according to the Addressing Table.

Close a command prompt

Open configuration window

2. Console into RTA from the Terminal on PCA.
3. Configure the hostname as RTA.
4. Configure IP addressing on RTA and enable the interface.
5. Encrypt all plaintext passwords.

RTA(config)# service password-encryption

6. Set the minimum password length to 10.

RTA(config)# security password min-length 10

7. Set a strong secret password of your choosing. Note: Choose a password that you will remember, or you will need to reset the activity if you are locked out of the device.
8. Disable DNS lookup.

RTA(config)# no ip domain-lookup

9. Set the domain name to CCNA.com (case-sensitive for scoring in PT).

RTA(config)# ip domain-name CCNA.com

10. Create a user of your choosing with a strong encrypted password.

RTA(config)# username any_usersecretany_password

11. Generate 1024-bit RSA keys.

Note: In Packet Tracer, enter the crypto key generate rsa command and press Enter to continue.

RTA(config)# crypto key generate rsa

The name for the keys will be: RTA.CCNA.com

Choose the size of the key modulus in the range of 360 to 2048 for your

General Purpose Keys. Choosing a key modulus greater than 512 may take

a few minutes.

How many bits in the modulus [512]: 1024

12. Block anyone for three minutes who fails to log in after four attempts within a two-minute period.

RTA(config)# login block-for 180 attempts 4 within 120

13. Configure all VTY lines for SSH access and use the local user profiles for authentication.

RTA(config)# line vty 0 4

RTA(config-line)# transport input ssh

RTA(config-line)# login local

14. Set the EXEC mode timeout to 6 minutes on the VTY lines.

RTA(config-line)# exec-timeout 6

15. Save the configuration to NVRAM.

Close configuration window

16. Access the command prompt on the desktop of PCA to establish an SSH connection to RTA.

Ssh With Password

Open a command prompt

C:> ssh /?

Packet Tracer PC SSH

Usage: SSH -l username target

C:>

Close a command prompt

Step 2:Configure Basic Security on the Switch

Configure switch SW1 with corresponding security measures. Refer to the configuration steps on the router if you need additional assistance.

1. Click on SW1 and select the CLI tab.

Open a configuration window

2. Configure the hostname as SW1.
3. Configure IP addressing on SW1 VLAN1 and enable the interface.
4. Configure the default gateway address.
5. Disable all unused switch ports.

Note: On a switch it is a good security practice to disable unused ports. One method of doing this is to simply shut down each port with the ‘shutdown’ command. This would require accessing each port individually. There is a shortcut method for making modifications to several ports at once by using the interface range command. On SW1 all ports except FastEthernet0/1 and GigabitEthernet0/1 can be shutdown with the following command:

SW1(config)# interface range F0/2-24, G0/2

SW1(config-if-range)#shutdown

%LINK-5-CHANGED: Interface FastEthernet0/2, changed state to administratively down

%LINK-5-CHANGED: Interface FastEthernet0/3, changed state to administratively down

<Output omitted>

%LINK-5-CHANGED: Interface FastEthernet0/24, changed state to administratively down

%LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to administratively down

The command used the port range of 2-24 for the FastEthernet ports and then a single port range of GigabitEthernet0/2.

6. Encrypt all plaintext passwords.
7. Set a strong secret password of your choosing.
8. Disable DNS lookup.
9. Set the domain name to CCNA.com (case-sensitive for scoring in PT).
10. Create a user of your choosing with a strong encrypted password.
11. Generate 1024-bit RSA keys.
12. Configure all VTY lines for SSH access and use the local user profiles for authentication.
13. Set the EXEC mode timeout to 6 minutes on all VTY lines.
14. Save the configuration to NVRAM.

This tutorial walks you through creating and connecting to a virtual machine (VM) on Azure using the Visual Studio Code Remote - SSH extension. You'll create a Node.js Express web app to show how you can edit and debug on a remote machine with VS Code just like you could if the source code was local.

Note: Your Linux VM can be hosted anywhere - on your local host, on premise, in Azure, or in any other cloud, as long as the chosen Linux distribution meets these prerequisites.

Prerequisites

To get started, you need to have done the following steps:

1. Install an OpenSSH compatible SSH client (PuTTY is not supported).
2. Install Visual Studio Code.
3. Have an Azure subscription (If you don't have an Azure subscription, create a free account before you begin).

Install the extension

The Remote - SSH extension is used to connect to SSH hosts.

Remote - SSH

With the Remote - SSH extension installed, you will see a new Status bar item at the far left.

The Remote Status bar item can quickly show you in which context VS Code is running (local or remote) and clicking on the item will bring up the Remote - SSH commands.

Create a virtual machine

If you don't have an existing Linux virtual machine, you can create a new VM through the Azure portal. In the Azure portal, search for 'Virtual Machines', and choose Add. From there, you can select your Azure subscription and create a new resource group, if you don't already have one.

Note: In this tutorial, we are using Azure, but your Linux VM can be hosted anywhere, as long as the Linux distribution meets these prerequisites.

Now you can specify details of your VM, such as the name, the size, and the base image. Choose Ubuntu Server 18.04 LTS for this example, but you can choose recent versions of other Linux distros and look at VS Code's supported SSH servers.

Set up SSH

There are several authentication methods into a VM, including an SSH public/private key pair or a username and password. We strongly recommend using key-based authentication (if you use a username/password, you'll be prompted to enter your credentials more than once by the extension). If you're on Windows and have already created keys using PuttyGen, you can reuse them.

Create an SSH key

If you don't have an SSH key pair, open a bash shell or the command line and type in:

This will generate the SSH key. Press Enter at the following prompt to save the key in the default location (under your user directory as a folder named .ssh).

You will then be prompted to enter a secure passphrase, but you can leave that blank. You should now have a id_rsa.pub file which contains your new public SSH key.

Add SSH key to your VM

In the previous step, you generated an SSH key pair. Select Use existing public key in the dropdown for SSH public key source so that you can use the public key you just generated. Take the public key and paste it into your VM setup, by copying the entire contents of the id_rsa.pub in the SSH public key. You also want to allow your VM to accept inbound SSH traffic by selecting Allow selected ports and choosing SSH (22) from the Select inbound ports dropdown list.

Auto shutdown

A cool feature of using Azure VMs is the ability to enable auto shutdown (because let's face it, we all forget to turn off our VMs…). If you go to the Management tab, you can set the time you want to shut down the VM daily.

Select Review and Create, then Create, and Azure will deploy your VM for you!

Once the deployment is finished (it may take several minutes), go to the new resource view for your virtual machine.

Connect using SSH

Now that you've created an SSH host, let's connect to it!

You'll have noticed an indicator on the bottom-left corner of the Status bar. This indicator tells you in which context VS Code is running (local or remote). Click on the indicator to bring up a list of Remote extension commands.

Choose the Remote-SSH: Connect to Host command and connect to the host by entering connection information for your VM in the following format: user@hostname.

The user is the username you set when adding the SSH public key to your VM. For the hostname, go back to the Azure portal and in the Overview pane of the VM you created, copy the Public IP address.

Before connecting in Remote - SSH, you can verify you're able to connect to your VM via a command prompt using ssh user@hostname.

Note: If you run into an error ssh: connect to host <host ip> port 22: Connection timed out, you may need to delete NRMS-Rule-106 from the Networking tab of your VM:

Set the user and hostname in the connection information text box.

VS Code will now open a new window (instance). You'll then see a notification that the 'VS Code Server' is initializing on the SSH Host. Once the VS Code Server is installed on the remote host, it can run extensions and talk to your local instance of VS Code.

You'll know you're connected to your VM by looking at the indicator in the Status bar. It shows the hostname of your VM.

The Remote - SSH extension also contributes a new icon on your Activity bar, and clicking on it will open the Remote explorer. From the dropdown, select SSH Targets, where you can configure your SSH connections. For instance, you can save the hosts you connect to the most and access them from here instead of entering the user and hostname.

Once you're connected to your SSH host, you can interact with files and open folders on the remote machine. If you open the integrated terminal (⌃` (Windows, Linux Ctrl+`)), you'll see you're working inside a bash shell while you're on Windows.

You can use the bash shell to browse the file system on the VM. You can also browse and open folders on the remote home directory with File > Open Folder.

Create your Node.js application

In this step, you will create a simple Node.js application. You will use an application generator to quickly scaffold out the application from a terminal.

Install Node.js and npm

From the integrated terminal (⌃` (Windows, Linux Ctrl+`)), update the packages in your Linux VM, then install Node.js, which includes npm, the Node.js package manager.

You can verify the installations by running:

Install the Express generator

Express is a popular framework for building and running Node.js applications. You can scaffold (create) a new Express application using the Express Generator tool. The Express Generator is shipped as an npm module and installed by using the npm command-line tool npm.

The -g switch installs the Express Generator globally on your machine so that you can run it from anywhere.

Create a new application

You can now create a new Express application called myExpressApp by running:

The --view pug parameters tell the generator to use the pug template engine.

To install all of the application's dependencies, go to the new folder and run npm install.

Run the application

Last, let's ensure that the application runs. From the terminal, start the application using the npm start command to start the server.

The Express app by default runs on http://localhost:3000. You won't see anything in your local browser on localhost:3000 because the web app is running on your virtual machine.

Port forwarding

To be able to browse to the web app on your local machine, you can leverage another feature called Port forwarding.

To be able to access a port on the remote machine that may not be publicly exposed, you need to establish a connection or a tunnel between a port on your local machine and the server. With the app still running, open the SSH Explorer and find the Forwarded Ports view. Click on the Forward a port link and indicate that you want to forward port 3000:

Name the connection 'browser':

The server will now forward traffic on port 3000 to your local machine. When you browse to http://localhost:3000, you see the running web app.

Ssh With Username Password

Edit and debug

From the Visual Studio Code File Explorer (⇧⌘E (Windows, Linux Ctrl+Shift+E)), navigate to your new myExpressApp folder and double-click the app.js file to open it in the editor.

IntelliSense

You have syntax highlighting for the JavaScript file as well as IntelliSense with hovers, just like you would see if the source code was on your local machine.

When you start typing, you'll get smart completions for the object methods and properties.

Debugging

Set a breakpoint on line 10 of app.js by clicking in the gutter to the left of the line number or by putting the cursor on the line and pressing F9. The breakpoint will be displayed as a red circle.

Now, press F5 to run your application. If you are asked how to run the application, choose Node.js.

The app will start, and you'll hit the breakpoint. You can inspect variables, create watches, and navigate the call stack.

Press F10 to step or F5 again to finish your debugging session.

You get the full development experience of Visual Studio Code connected over SSH.

Ending your SSH connection

You can end your session over SSH and go back to running VS Code locally with File > Close Remote Connection.

Ssh Config Save Password Tool

Congratulations!

Congratulations, you've successfully completed this tutorial!

Next, check out the other Remote Development extensions.

Or get them all by installing the Remote Development Extension Pack.